On Tue, Apr 5, 2011 at 4:32 AM, Mark Wendt <[email protected]> wrote:
> > > On 04/05/2011 01:46 AM, Igor Chudov wrote: > > > http://igor.chudov.com/projects/Bridgeport-Series-II-Interact-2-CNC-Mill/35-Large-Enclosure/ > > > > > > This one is much bigger than my old one. It is made of 1/4" > > polycarbonate, glued and the front piece locks in place, by > > interlocking with sides (see pictures). > > > > Tomorrow, I will receive 1" square polycarbonate tubing and will glue > > those pieces into the rear corners of the enclosure, for extra > > stiffness. This would help prevent the glued joints from breaking when > > I take the enclosure out or put it back in. > > > > i > > What, you don't want coolant splatters all over the walls and stuff? > ;-) I made up a dust collector hood out of lexan for my machine out of > 3/8" sheet. That stuff ain't cheap. Did you get the 1/4" stuff in a 4' > x 8' sheet? What did they zap you for on that? > > It was a 4x4 feet 1/4" square from McMaster Carr, $111. I cut it into the pieces that I needed and used up 85% of the sheet making this enclosure. I glued it with Loctite 409 glue. Where did you get your 3/8" stuff??? i ------------------------------------------------------------------------------ Xperia(TM) PLAY It's a major breakthrough. An authentic gaming smartphone on the nation's most reliable network. And it wants your games. http://p.sf.net/sfu/verizon-sfdev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
