Ok, thanks! Unfortunately I was on a very short time, so I left it with "minus" sign before scale parameter in INI file. It seems that it works that way too.
Viesturs 2011/7/5 andy pugh <bodge...@gmail.com>: > On 5 July 2011 15:11, Viesturs Lācis <viesturs.la...@gmail.com> wrote: > >> Got stuck with this - how do I specify that I want to invert direction >> bit of a particular stepgen? That is not a GPIO bit and I do not see >> any related pin anywhere in HAL > > Look in the dmesg output from when the hm2 driver loads. It will tell > you which pin number the stepgen dir is on. You can then invert it > with the corresponding GPIO pin parameter. > > -- > atp > "Torque wrenches are for the obedience of fools and the guidance of wise men" > > ------------------------------------------------------------------------------ > All of the data generated in your IT infrastructure is seriously valuable. > Why? It contains a definitive record of application performance, security > threats, fraudulent activity, and more. Splunk takes this data and makes > sense of it. IT sense. And common sense. > http://p.sf.net/sfu/splunk-d2d-c2 > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ All of the data generated in your IT infrastructure is seriously valuable. Why? It contains a definitive record of application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-d2d-c2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
