I have to admit that I was able to run latency test for a short time interval. Max jitter was 7300 ns.
Nevertheless I am running it with a 0,75 ms servo period, which gives update interval of 1,33 kHz and I have never had any messages about realtime delays. The machine has 7i43 board, which runs 6 stepgens. I do not know the base period length, because there are no functions attached to base-thread, just to servo-thread. Viesturs 2011/7/5 Andrew <[email protected]>: > 2011/7/5 Viesturs Lācis <[email protected]>: >> I got the BIOS version that is on the D525 board. >> I also ran a short latency test. > > By the way, which latency do you have? > My D525MW shows up to 18000 with 2 glxgears running for several hours. > Even base period 35000 results in realtime delay message (with 3000 ns > driver timings). I'm very disappointed. > > Andrew > > ------------------------------------------------------------------------------ > All of the data generated in your IT infrastructure is seriously valuable. > Why? It contains a definitive record of application performance, security > threats, fraudulent activity, and more. Splunk takes this data and makes > sense of it. IT sense. And common sense. > http://p.sf.net/sfu/splunk-d2d-c2 > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ All of the data generated in your IT infrastructure is seriously valuable. Why? It contains a definitive record of application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-d2d-c2 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
