On 7/5/2011 5:26 PM, Andrew wrote: > 2011/7/6 andy pugh<[email protected]>: > >> On 5 July 2011 20:56, Andrew<[email protected]> wrote: >> >> >>> My D525MW shows up to 18000 with 2 glxgears running for several hours. >>> Even base period 35000 results in realtime delay message (with 3000 ns >>> driver timings). I'm very disappointed. >>> >> Do you have isolcpus set? That might help. My D510 actually gives RT >> errors with the video camera plugged in (psha reports no problems >> though) >> > Yes, I forgot to mention... isolcpus=1 and HT = off. Based on all > feedbacks I expected less than 7500, maybe 10000, but 18000 is too > much. Just can't understand what's the problem. Actually it will be > used with 7i43, latency is not that significant, but it is still > strange. > > Andrew > >
Andrew, Any chance you have a D510 board lying around that you can plug that hard drive into to see if you get the same results on a D510 board? I know this sounds odd but this usually works (swapping drives between different Atom boards). How did you get the software set that you are using? Did you install off the CD or ?? Dave ------------------------------------------------------------------------------ All of the data generated in your IT infrastructure is seriously valuable. Why? It contains a definitive record of application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-d2d-c2 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
