Hello EMC users,
I have difficulty when adding additional parallel ports (other than the
parallel port on mother board) and configuring them as input. When I monitor
the pins 2 to 9 they are
always off, but the pins 10 or 11 are on. I do not have this problem when I
configure the parallel port on the mother board as input. Pins 2 to 9 on the
parport on mother board
are all on and they turn off when connect them to ground (They are all O.K.)
Could you tell what I need to do to make pins 2 to 9 act correctly on the
additional parports too.
I do not have any problem when configuring additional parports as
output.Thanks and regards
Farzin
------------------------------------------------------------------------------
Got Input? Slashdot Needs You.
Take our quick survey online. Come on, we don't ask for help often.
Plus, you'll get a chance to win $100 to spend on ThinkGeek.
http://p.sf.net/sfu/slashdot-survey
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
