I think either of these two are pretty clear. sserial_port0=01234xxxxx sserial_port_0=01234xxxxx
John On 10/27/2011 7:07 PM, andy pugh wrote: > Some of the Mesa Smart Serial (SSLBP) cards can have variable pinouts > depending on operating mode. > For example, the 7i76 has mode 0 (digital in, digital out + > step.encoder.spindle), Mode 1 (all the above, plus 4 x analog inputs) > and mode 2 (all the above, plus the analog inputs, plus the field > voltage) > > Currently the hal file parameter is sserial_mode0=0123xxxx to > configure the cards on port 0, and sserial_mode1=xx21x200 to > conffigure port 1 (where "x" disables a card). > > Unfortunately, the docs say "sserial_modes=" (note the plural). So I > need to change one, or both, to be consistent. I would just change the > docs, but I have had it pointed out to me that the parameter name is > not as clear as it could be and that, for example I could use: > > sserial0=01234xxxxx > sserial_0=01234xxxxx > sserial_port0=01234xxxxx > sserial_port_0=01234xxxxx > > Which would be preferred? Or does anyone have a better idea? > ------------------------------------------------------------------------------ The demand for IT networking professionals continues to grow, and the demand for specialized networking skills is growing even more rapidly. Take a complimentary Learning@Cisco Self-Assessment and learn about Cisco certifications, training, and career opportunities. http://p.sf.net/sfu/cisco-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
