Currently, I am using Inkscape to lay out and graphically connect HAL component symbols. I edit my .hal file using the diagram as a reference. This is working well so far, but it would be much better if, for instance, the diagram connections would move with a component if I decide to move it, which Inkscape doesn't do, as far as I know. I started using gEDA, but this page: http://wiki.linuxcnc.org/emcinfo.pl?HalSchematicsUsingGschem
does not provide a complete set of symbols. I would like to make a complete set, but some of the symbol attributes used for the samples from the above are not explained. I can go ahead and make symbols without the attributes, but if someone could share how these attributes work, it might save me from redoing mine latter. I would also like to add what I have learned to the above page. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ The demand for IT networking professionals continues to grow, and the demand for specialized networking skills is growing even more rapidly. Take a complimentary Learning@Cisco Self-Assessment and learn about Cisco certifications, training, and career opportunities. http://p.sf.net/sfu/cisco-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
