On Thursday, January 05, 2012 08:59:41 AM Mark Wendt did opine: > On 01/05/2012 08:39 AM, gene heskett wrote: > >> Love the "clamp" mod on your cutting head!<VBSEG> > >> > >> Mark > > > > Chuckle. BTDT, but needed something just a hair more substantial for > > milling mortis and tennon joints with my micromill on steroids: > > > > <http://http://coyoteden.dyndns-free.com:85/gene/emc/17.html> > > > > The 4 bolts on the right are tapped into holes drilled in the front > > face of the Z sled casting, and once the HF die grinder was fitted, > > it looks like this: > > > > <http://http://coyoteden.dyndns-free.com:85/gene/emc/18.html> > > > > Which almost hides the mill from that angle, and also shows the white > > ash jig that holds the stick the tenon will be carved on. I used it > > that way, but it really needs another skyhook& screen door spring to > > hold up the additional weight, the off-center loading on the sleds > > ways tends to make the sled want to move in 2 thou increments unless > > I drown it with Vactra. > > > > Also faintly visible to the left is my custom made boring bar mounted > > on the 7x10 that carved the saddles in the clamp around the die > > grinder, after the ridges on the die grinder nose housing were laid > > back flat with a 14" mill bastard file. That boring bar is actually > > a groove cut in the end of a piece of 5/8" cold roll, with a Glanz > > brand 1/4" indexable boring bar driven into the groove with a 3 > > pounder, and superglued to be sure. Unforch, the saddle on that 7x10 > > is about tapped out, literally as I had to replace the compound > > slider when I stripped out the threads in the top of it while boring > > a previous project, the coupling housing& motor mount for my A/B/C > > axis rotary table. I was boring a nearly 2" diameter hole well over > > 3" deep. The 7x10 complained, a lot! The end result of that is at: > > > > <http://http://coyoteden.dyndns-free.com:85/gene/emc/4.html> > > > > I think they would call that shade tree engineering, but the mortis's& > > tenons it cut fit better than any I had cut by hand before. Don't > > like the fit? Tweak the code! > > > > Cheers, Gene > > Well crap. Work for some reason has black-listed your domain. Can't > get to your web site from here. > > Mark
Grrrr. Sorry Mark, try subbing 204:111:66;235 for the contrived domain name & then go offer to re-adjust the IT guys attitude for blocking a dyndns address. That is in fact _this_ machine. And since I'm on a cable modem, there is nothing dynamic about it, that address is fixed in the modem and won't change. Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) My web page: <http://coyoteden.dyndns-free.com:85/gene> Live within your income, even if you have to borrow to do so. -- Josh Billings ------------------------------------------------------------------------------ Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex infrastructure or vast IT resources to deliver seamless, secure access to virtual desktops. With this all-in-one solution, easily deploy virtual desktops for less than the cost of PCs and save 60% on VDI infrastructure costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
