Look here for fast motherboard - cpu combinations: https://www.osadl.org/Individual-system-data.qa-farm-data.0.html#c4366
unfortunately we cant use the osadl kernel patch as yet (that will be my next gripe, after I am over the present one. So dont expect results any time soon.) cheers, j. On Fri, Mar 30, 2012 at 1:30 AM, Jeshua Lacock <[email protected]> wrote: > > On Mar 29, 2012, at 12:59 AM, Viesturs Lācis wrote: > > > 1) If You mean: which jitter number from latency test results to take > > into account? > > 25us figure represents jitter in base thread. > > 1ms figure represents jitter in servo thread. > > > > Which figure to use? It depends... Will You run anything in base > > thread (like Erik mentioned - software step generation is one of the > > tasks for base thread) or will everything be done in servo thread? > > I am using servos with the Gecko 320. > > > 2) If You mean: which number to take for the latency number to run? > > IMHO, the question is not valid, You cannot put Your own numbers > > there, You simply should open latency test and press "run" (or > > something like that, I do not remember correctly) and then, with that > > I am familiar with the latency test, that is exactly what I was referring > to. It reports two Max Jitters there and I did not know for certain that > one was for servos and the other for steppers. Thank you. > > Does anyone know of some known settings to try disabling in CMOS to > possibly get lower numbers? My 1.0ms Max Jitter is under 9300, but if > possible I would like to get it even lower. > > Thanks! > > > Best, > > Jeshua Lacock > Founder/Engineer > 3DTOPO Incorporated > <http://3DTOPO.com> > Phone: 208.462.4171 > > > > ------------------------------------------------------------------------------ > This SF email is sponsosred by: > Try Windows Azure free for 90 days Click Here > http://p.sf.net/sfu/sfd2d-msazure > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
