Hi all; I was able to find a schematic for one of the earlier controllers used in these machines, for one that had the external interfacing stuff on a daughterboard and I suspect it might be usable as a trouble shooting guide if it was printable. But that link isn't printable, for some reason pages 2 and up are blank in the print preview.
The controller in my lathe is probably the next generation, no daughterboard because the mini-dip chips that were on the daughterboard were shrunk down to tsop stuff, allowing the whole thing to be fitted to only 1 pcb assembly. Also, no power transformer, instead a bunch of 5 watt metal film R's occupy that location on my board. I have also found a hookup schematic that incorporates an extra cnc/manual switch and reversing relay that my current interface board should work with, so what I need now is a working schematic. Does any one have such a beast? Cheers, Gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) My web page: <http://coyoteden.dyndns-free.com:85/gene> Life is a healthy respect for mother nature laced with greed. ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users