I put in the pyvcp button yesterday for touch off Z to material and love it! No more fumbling for me... John
On 5/8/2012 11:37 AM, BRIAN GLACKIN wrote: >> <snip> >>> John >> There is an echo in here. Maybe John and I are alone, but I think far fewer >> homing and touch off mistakes, where a previously established setting was >> in-advertantly foobared, is caused by the auto coupling between the last >> axis moved and these two functions. I have destroyed my Z hundreds of >> times while trying to fine tune the X. After a while, it becomes quite an >> irritant for me. >> >> <snip> >> > THis certainly has bitten me numerous times, but usually foobaring the X > axis when I am fiddling with the Z. Nothing like moving the X touchoff 15 > inches instead of the Z 0.015in during a series of sequential program cuts. > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's security and > threat landscape has changed and how IT managers can respond. Discussions > will include endpoint security, mobile security and the latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
