since you probably have a computer, you probably also already have a laser.
--- On Fri, 7/20/12, andy pugh <bodge...@gmail.com> wrote: > From: andy pugh <bodge...@gmail.com> > Subject: Re: [Emc-users] Linuxcnc 5 axis coolness > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Date: Friday, July 20, 2012, 3:59 AM > On 20 July 2012 11:42, Claude > Froidevaux <men...@bluewin.ch> > wrote: > > > sometimes I think of LinuxCNC as a HAL platform, where > G-code > > interpreter is only one module, that can be > instantiated if needed. > > This is something I realised recently too. I have made a > start on a > GladeVCP GUI which imports an image file, then feeds that to > a > realtime component that generates an XY raster pattern and > synchronised intensity value for laser rastering > applications. There > is no G-code anywhere in the system. Effectively the image > file > becomes the program. > But as I don't have, nor intend getting, a laser, it has > been rather > pushed to the back-burner once I proved it could be done > :-) > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > Live Security Virtual Conference > Exclusive live event will cover all the ways today's > security and > threat landscape has changed and how IT managers can > respond. Discussions > will include endpoint security, mobile security and the > latest in malware > threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users