On Tue, 2012-10-30 at 18:51 -0700, Kirk Wallace wrote: > On Tue, 2012-10-30 at 20:23 -0500, Jon Elson wrote: > ... snip > > But, I'm worried about the missing estop hal pins you mentioned. > > > > Jon > ... snip > > I think the problem is that in order to try a "known" good set of config > files, I used the ppmc configs from LinuxCNC rather than my old lathe > config files. I think the files I used didn't load the estop latch or > similar component, so when LinuxCNC tried to connect the e-stop pins on > loading, it barfed. > > I went through and mapped out all of the connections and settings on > paper, and restored the e-stop system on my lathe and everything is > working fine. I'm also updating all the old newsig's to net's and > cleaning up some of the old hacks to new hacks.
I reloaded an earlier configuration (different PC and software) and the config files look okay, so I must have messed them up along the way. It looks like this PC has other EPP issues which might have prompted me to mess with the config files. In other words Jon, I don't now what I did wrong. My current PC and config files are good. You have explained how to fix the remaining issue of the warning messages in AXIS. Sorry to cause a fuss. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_sfd2d_oct _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
