On 6 November 2012 13:42, Dave Caroline <dave.thearchiv...@gmail.com> wrote:
> The sliding head in the garage has two tools on a rocker > so there is an inversion in direction for cutting too :) That can be accomodated in the existing structure in at least two ways. 1) You can use negative diameters when using the other-side tool. This "just works" 2) You can use coordinate rotation around the Z axis (optionally with a G-code remap) to switch to the rear tool. Discussion here: http://www.linuxcnc.org/index.php/english/forum/26-turning/24729-gangtool-setup--backtools?limitstart=0 -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ LogMeIn Central: Instant, anywhere, Remote PC access and management. Stay in control, update software, and manage PCs from one command center Diagnose problems and improve visibility into emerging IT issues Automate, monitor and manage. Do more in less time with Central http://p.sf.net/sfu/logmein12331_d2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
