> What happens if you have more than 99 tools? > > -- > atp
Andy - not allowed, according to the Fanuc folks. It is a lathe after all. To summarize what I think people want with this patch (and to keep it separate from Michael/Andy's discussion of Ideal Tool Table): 1. Features Mask in RS274NGC section of INI should be changed to a FANUC TOOL CHANGE = 1 flag. 2. Current G7/G8 mode should determine whether the wear offset value entered was a diameter or radius value 3. Tooledit.tcl should display both wear and geometery offsets for tools 1-99, not display wear offsets as if they were the geometry offsets for tools 1-99 and geometry offsets as if they were geometry offsets for tools 10,000 - 10,099. I will take care of 1 & 2, but I think we'd need/want JEpler or another TCL guru (or someone with time on their hands) for 3. It's not as simple as just adding the extra values and subtracting 10,000 at the appropriate times - you also have to handle the "Add Tool to Table" business. I'm not sure it makes much sense to move this to master until the tooledit thing is sorted - it would be one more thing that would clog up the forums with questions. Rogge ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_nov _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
