On Sat, Dec 15, 2012 at 11:42 PM, Jon Elson <[email protected]> wrote: > Mail Marshland wrote: >> I've installed the latest version of the software and I can connect to >> my windows network, networked printer (Printing was such an easy >> install) however I cannot connect to the web. Using a wired >> connection. I could with 2.4 Is this something to do with this version >> of the software? >> > If you can see your local machines, then most likely you have not set > the address > of your ISP's domain name servers. There should be a place in the network > config to set these addresses, or set them to be loaded from the ISP. > Perhaps > your router is not passing this info on to you through the DHCP mechanism, > and it may be quicker to just set them manually. Or, if you don't have > the automatic setting of the DNS address turned on, try turning it on and > reboot. > > If that isn't it, it may be that your router/firewall is not enabling access > from this machine, and access needs to be permitted. > > Jon
Or he hasn't set the correct gateway/router address. Mark ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
