Looking at the board from Mesa I have here I think you guys are right
that I should have plenty of IO available and perhaps I should use the
individual home switches after all. I need also to source some nice zero
backlash 22mm to 19mm compression style couplers from a USA Source that
are zero backlash and can handle up to around 10nm of torque. The fellow I
am kinda copying who has already done a similar retrofit on a Cincinnati
Arrow 500 vmc in England has a source but getting them here might be
costly. I'd like to find some reasonably priced high quality units
stateside. Anyone........Anyone.......Beuler.....Beuler....??
I sure appreciate all the ideas and suggestions guys. Peace
Pete
On Wednesday, February 13, 2013, Pete Matos <[email protected]> wrote:
> Billy,
> SWEET!!!! That is all....peace
>
> Pete
>
>
> On Wednesday, February 13, 2013, Billy Huddleston <[email protected]> wrote:
>> No, it's me.
>>
>> Just got back from the Dentist.. So, I'm a little sore in the mouth..
I'll see about ringing you up later tonight.
>>
>> On the homing.. It is VERY nice to be able to home multiple axis at
once, and someone pointed out using the Index in conjunction with the home
is even more accurate. You have
>> more than enough inputs.. so no reason the cheap out on it. I don't
think 3 vs 1 is going to make wiring that much more complex.. In fact, it
might make it easier as you won't
>> have to try to make sure all 3 are wired in series..
>>
>> I got the email with the attached document.. I'll look it over after I
get finished at work.
>>
>> Thanks, Billy.
>>
>> On 02/13/2013 02:31 PM, Pete Matos wrote:
>>> Billy my good man!!
>>> Nice to see you join in this conversation. Why do you say we need
>>> multiple home switch pins actually, if it works the way I am thinking it
>>> should work just fine with a single input no? Remember I LOVE simple
and
>>> anything to make wiring neater and easier is the road I'm tearin' down.
If
>>> there is a specific reason other than simply being able to home both
axes
>>> of the table at the same time I am listening LOL.... I like a nice slow
>>> ACCURATE home routine. No hurry for me there really. I usually run a
warm
>>> up programs as well once homed.
>>>
>>> I sent you an email,gimme a call when you get a second man. And if
this
>>> is another Billy then forget everything I just said LOL...peace
>>>
>>> Pete
>>>
>>>
>>>
>>> On Wednesday, February 13, 2013, Gene Heskett <[email protected]> wrote:
>>>> On Wednesday 13 February 2013 13:57:51 Kent A. Reed did opine:
>>>>
>>>>> On 2/13/2013 11:18 AM, Gene Heskett wrote:
>>>>>> Hell, even the reference to Fred & Wilma dates me, I haven't seen a
>>>>>> Flintstones program on tv in a good 30 years, so I know there are
>>>>>> folks on this list who don't have a clue about them, or Howdy Doody
>>>>>> either for that matter. Magic twanger? Whazzat?;-)
>>>>> Come on, Gene, I Billy my good man,
>>> remember who plunked it!
>>>> Sure, that was Froggie :) Who got very little face time so folks could
>>>> never tell if it was a puppet or what. Everybody assumed it was just
>>>> another off-camera puppet I guess.
>>>>
>>>>> Fortunately, today's youngsters can find a lot of this stuff on the
>>>>> internet. I just don't know why they would bother to look!?!
>>>>>
>>>> TBT, I wouldn't bother. Looking back 60 years on that stuff, I can't
>>>> believe how asinine it actually was. Would you believe there is still
an
>>>> image orthicon camera tube, a 4.5" face adorning a shelf in the shop at
>>>> WDTV? That was the imaging device in use when Howdy Doody was on the
air.
>>>>
>>>> Bits and pieces of history, that. We also have an old Arri-Flex 16mm
news
>>>> camera ensconced in a glass display case in the receptionists area.
When
>>>> we moved off the mountaintop to a studio in 1984, about 2 weeks before
I
>>>> walked in the door to be the new Chief, one of the things they moved
was
>>> an
>>>> automatic film processor. It gradually faded from use as the u-matic
>>>> recorders were taking over that job by then. I didn't miss it a bit
when
>>>> we drained it the last time.
>>>>
>>>>> Regards,
>>>>> Kent
>>>>>
>>>>>
>>>>>
------------------------------------------------------------------------
>>>>> ------ Free Next-Gen Firewall Hardware Offer
>>>>> Buy your Sophos next-gen firewall before the end March 2013
>>>>> and get the hardware for free! Learn more.
>>>>> http://p.sf.net/sfu/sophos-d2d-feb
>>>>> _______________________________________________
>>>>> Emc-users mailing list
>>>>> [email protected]
>>>>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>>>
>>>> Cheers, Gene
>>>> --
>>>> "There are four boxes to be used in defense of liberty:
>>>> soap, ballot, jury, and ammo. Please use in that order."
>>>> -Ed Howdershelt (Author)
>>>> My web page: <http://coyoteden.dyndns-free.com:85/gene> is up!
>>>> My views
>>>> <http://www.armchairpatriot.com/What%20Has%20America%20Become.shtml>
>>>> "People should have access to the data which you have about them.
There
>>>> should
>>>> be a process for them to challenge any inaccuracies."
>>>> -- Arthur Miller
>>>> I was taug--
>> Billy Huddleston Inner Vision
>>
>> *William Huddleston
>> Inner Vision Development Corp*
>> Office: 865.560.2752
>> Fax: 865.560.2703
>>
>> http://www.ivdc.com
>> *Development and Consulting... Simplified.*
>>
>> <http://www.facebook.com/pages/Inner-Vision-Development/120023721424> <
http://twitter.com/ivdc> <http://www.linkedin.com/in/ivdccorp>
>>
>>
------------------------------------------------------------------------------
>> Free Next-Gen Firewall Hardware Offer
>> Buy your Sophos next-gen firewall before the end March 2013
>> and get the hardware for free! Learn more.
>> http://p.sf.net/sfu/sophos-d2d-feb
>> _______________________________________________
>> Emc-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
------------------------------------------------------------------------------
Free Next-Gen Firewall Hardware Offer
Buy your Sophos next-gen firewall before the end March 2013
and get the hardware for free! Learn more.
http://p.sf.net/sfu/sophos-d2d-feb
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
