On Mon, 18 Mar 2013 15:37:30 -0600, you wrote: >I would like to get the A axis to lock on to my rotary table center >line. I have upgraded to LinuxCNC/Axis 2.5.0 and the A axis is still >locked on to the X axis machine position, G53. The INI line I am using >is GEOMETRY = AXYZ. When I set the part position to be on the center >line of the rotary table using G54 I thought that the A axis center >would also move to the G54 position. The A axis is locking on to the >new X axis position, example move, X axis plus 2 inches from the >machine position then G54 G92 X0, then A will rotate at around the new >X G54 position. But I can not get the A axis to lock on to the new Y,Z >G54 position. LinuxCNC/Axis can work properly as you can see form the >youtube video http://www.youtube.com/watch?v=R1DCXe9t3UE .
The rotary table in that video is on the C axis, not the A axis? A is rotary around X axis B is rotary around Y axis C is rotary around Z axis Steve Blackmore -- ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_mar _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
