The machine is capable but the process is flawed by the inconsistencies in the material. For that we had to apply a huge amount of pressure on the rollers and then things gets interesting.
On 2013/06/11 11:30 AM, Gregg Eshelman wrote: > --- On Mon, 6/10/13, Marius Liebenberg <[email protected]> wrote: > <clip> >> Our test showed that we cannot get a repeatable >> result and so we have to redesign the X axis mechanics. > In other words the machine simply wasn't capable of the degree of precision > desired. Back to the <s>drawing board</s> CAD software. ;) > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Regards / Groete Marius D. Liebenberg MasterCut cc Cel: +27 82 698 3251 Tel: +27 12 743 6064 Fax: +27 86 551 8029 Skype: marius_d.liebenberg --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 130610-2, 2013/06/10 Tested on: 2013/06/11 03:54:13 PM avast! - copyright (c) 1988-2013 AVAST Software. http://www.avast.com ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
