Just heard back from the "Executive Vice-President" of TX/RX Labs about hosting. He said, "Let's do it!" So, Houston is definitely available any date y'all want.
On Wed, Jun 26, 2013 at 12:34 PM, Stuart Stevenson <stus...@gmail.com>wrote: > Sounds like we may have more than a few places to choose from. Exciting. > > > On Wed, Jun 26, 2013 at 12:27 PM, Pete Matos <petefro...@gmail.com> wrote: > > > OR..... > > You can all come over to my house and work on/ play with my Cincinatti > > Arrow 500 retrofit and I will buy the Pizza and sodas LOL.... Connor > lives > > nearby as do a lot of folks down in the Georgia area. Peace > > > > Pete > > > > > > > > On Wed, Jun 26, 2013 at 1:19 PM, Stuart Stevenson <stus...@gmail.com> > > wrote: > > > > > I like Houston. I have a cousin with a machine shop there. A man that > > used > > > to develop and install MDSI's OpenCNC lives there. I would have a > couple > > > people to bring from Houston. > > > > > > > > > > > > On Wed, Jun 26, 2013 at 11:36 AM, Chris Kelley <tensait...@gmail.com> > > > wrote: > > > > > > > On 6/26/2013 10:26 AM, emc-users-request@lists.sourceforge.netwrote: > > > > > Lacking a date and place by Nov 1 2013 I will set a date to have > > the > > > > > meeting in Wichita next year. This time we will post it in all > places > > > so > > > > > more can see it and plan for it. Any suggestions on the date are > > > welcome. > > > > > Maybe this message should be posted everywhere also. > > > > > thanks > > > > > Stuart > > > > > > > > I'm talking to the other folks at my hackerspace/makerspace about > > > hosting. > > > > I have no doubt that they'd be happy to do it. > > > > > > > > At TX/RX Labs, we have 6 different machines running LinuxCNC: 2 > routers > > > > (3x4 and 2x2), a Bridgeport Series 1 CNC, a 3D printer (Mendel), an > > Emco > > > > CNC mini-Lathe, and a PCB mill plus a Powerhawk mill and Okuma lathe > > > slated > > > > for future LCNC conversion. (Another member is bringing in another > knee > > > > mill running LCNC this weekend.) We also teach classes on using LCNC > at > > > > least twice a year. Our facility is approximately 16,000 sq/ft. Half > is > > > > air-conditioned and includes a conference room with > projector/screen, a > > > > classroom with 18 workstations, electronics bays, wireless internet, > > and > > > a > > > > full kitchen. > > > > > > > > We're in Houston, so if you don't like the heat we could hold the > > meeting > > > > later or earlier in the year, we're a non-profit so exact dates are > > > really > > > > flexible. But, on the many plus sides, Houston has more restaurants > per > > > > capita than anywhere in the world (so good food is no problem), and > the > > > > Labs are in the center of Houston, so they're all close. > > > > > > > > > > > > On Wed, Jun 26, 2013 at 10:17 AM, Ron Ginger < > rongin...@roadrunner.com > > > > >wrote: > > > > > > > > > On 6/26/2013 10:26 AM, emc-users-request@lists.sourceforge.netwrote > : > > > > > > Lacking a date and place by Nov 1 2013 I will set a date to > have > > > the > > > > > > meeting in Wichita next year. This time we will post it in all > > places > > > > so > > > > > > more can see it and plan for it. Any suggestions on the date are > > > > welcome. > > > > > > Maybe this message should be posted everywhere also. > > > > > > thanks > > > > > > Stuart > > > > > > > > > > There are discussions underway by a few guys to resurrect the CNC > > > > > workshop in Detroit next June. A hacker space is involved to be the > > > > > site. It is early, but it is started. > > > > > > > > > > ron ginger > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > This SF.net email is sponsored by Windows: > > > > > > > > > > Build for Windows Store. > > > > > > > > > > http://p.sf.net/sfu/windows-dev2dev > > > > > _______________________________________________ > > > > > Emc-users mailing list > > > > > Emc-users@lists.sourceforge.net > > > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > This SF.net email is sponsored by Windows: > > > > > > > > Build for Windows Store. > > > > > > > > http://p.sf.net/sfu/windows-dev2dev > > > > _______________________________________________ > > > > Emc-users mailing list > > > > Emc-users@lists.sourceforge.net > > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > > > > > > > > > -- > > > Addressee is the intended audience. > > > If you are not the addressee then my consent is not given for you to > read > > > this email furthermore it is my wish you would close this without > saving > > or > > > reading, and cease and desist from saving or opening my private > > > correspondence. > > > Thank you for honoring my wish. > > > > > > > > > ------------------------------------------------------------------------------ > > > This SF.net email is sponsored by Windows: > > > > > > Build for Windows Store. > > > > > > http://p.sf.net/sfu/windows-dev2dev > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > ------------------------------------------------------------------------------ > > This SF.net email is sponsored by Windows: > > > > Build for Windows Store. > > > > http://p.sf.net/sfu/windows-dev2dev > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > -- > Addressee is the intended audience. > If you are not the addressee then my consent is not given for you to read > this email furthermore it is my wish you would close this without saving or > reading, and cease and desist from saving or opening my private > correspondence. > Thank you for honoring my wish. > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by Windows: > > Build for Windows Store. > > http://p.sf.net/sfu/windows-dev2dev > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
