On Wed, 26 Jun 2013, Belli Button wrote:
> Date: Wed, 26 Jun 2013 16:00:33 +0200
> From: Belli Button <be...@iafrica.com>
> Reply-To: "Enhanced Machine Controller (EMC)"
> <emc-users@lists.sourceforge.net>
> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
> Subject: [Emc-users] Max current draw on 7I33 and 7I29
>
> What is the max current I can draw on the 5V for the (per) encoder without
> external power supply? Using 7I29 and 7I33.
I would suggest a total of no more than 500 mA. This might be lower if you
have long (>3 ft) flat cables
>
> Thanks,
>
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by Windows:
>
> Build for Windows Store.
>
> http://p.sf.net/sfu/windows-dev2dev
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
