Change tour model so it can have an offset for the joint coordinates. Then give an arbitrary value to your offset so that z gets a value inside the working limits.
I think this will work. If after this you get a following error, ask again :). Javier El 03/09/2013 23:09, "Charles Steinkuehler" <char...@steinkuehler.net> escribió: > On 9/3/2013 3:10 PM, Bob Weiss wrote: > > Ok, I got it into World mode and my next issue is I tried to issue the > > command: G0 Z10 and G0 Z-10 and it gives me an error saying the command > > would put the axis past its postive limit. It said this 3 times for each > > axis > > > > After homeing the machine and switching to World mode it made X and Y 0.0 > > but changed Z to -278.00 ? Not sure where it got that value from for Z? > > > > I was able to do G0 X10 Y10 before the command above and it seemed to > move > > the 3 axis properly to that position. Its just the Z command isn't moving > > anything? > > I don't have much to add, but if you have the time, please take some > notes on the issues that give you problems. > > You're way ahead of me on getting the delta kinematics going, and you > are one of the first folks getting into using LinuxCNC with a 3D printer > who was not already at least somewhat familiar with CNC controls > (LinuxCNC or others). > > Your experiences and impressions will help make it easier for other new > users. Even if you don't have time to do a full write up, if you send > me your "gotchas", I'll at least make a FAQ or "watch out for..." page > on my blog. > > Thanks! > > Oh...and remember: > > http://www.despair.com/mistakes.html > > :) > > -- > Charles Steinkuehler > char...@steinkuehler.net > > > > ------------------------------------------------------------------------------ > Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more! > Discover the easy way to master current and previous Microsoft technologies > and advance your career. Get an incredible 1,500+ hours of step-by-step > tutorial videos with LearnDevNow. Subscribe today and save! > http://pubads.g.doubleclick.net/gampad/clk?id=58040911&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more! Discover the easy way to master current and previous Microsoft technologies and advance your career. Get an incredible 1,500+ hours of step-by-step tutorial videos with LearnDevNow. Subscribe today and save! http://pubads.g.doubleclick.net/gampad/clk?id=58040911&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
