On 2 October 2013 20:41, Stephen Dubovsky <smdubov...@gmail.com> wrote: > Just wire the relay to the AC line. Connect the resistor to the COM & NC > contacts. Relay connects bleeder resistors when AC line is removed. No > need to get fancy.
That was what I thought. https://plus.google.com/photos/108164504656404380542/albums/5930254306221907233 Has twice been the result. The problem comes when the relay attempts to open for whatever reason while the caps are not fully discharged. (such as a momentary power glitch) However, there is a similar problem using a solid-state solution, as exactly the same thing will happen if the FET is latched on. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
