> Date: Thu, 3 Oct 2013 16:20:51 +0200
> From: mar...@mastercut.co.za
> To: emc-users@lists.sourceforge.net
> Subject: Re: [Emc-users] Following Error with Steppers
>
> Chris
> This is a very old bug that has been reported several times. At least
> once by myself. It is still in all the latest code on master. We just
> delete these lines each time. :)
>
> On 2013/10/03 04:43 AM, Chris Morley wrote:
> >
> >> From: bodge...@gmail.com
> >> Date: Wed, 2 Oct 2013 18:47:08 +0100
> >> To: emc-users@lists.sourceforge.net
> >> Subject: Re: [Emc-users] Following Error with Steppers
> >>
> >> On 2 October 2013 18:26, Russell Brown <russ...@lls.lls.com> wrote:
> >>
> >>> loadrt abs names=
> >>> loadrt lowpass names=
> >> This is a stepfconf bug. I can't recall what prompts it. I thought it
> >> was fixed. (it tries to load a bunch of components with blank names,
> >> and then their pin names collide)
> >>
> > Pncconf bug -but is probably fixed. what version was this made with?
> >
Ok I think it's really fix this time. seems asking for a gladeVCP sample panel
but without a spindle speed display set it off.
Sorry It took so long - I thought I fixed it...musta been busy with Gscreen.
I also did some other work mostly related to spindle command signals.
Please test if you can and report bugs (this fix is in master)
Chris M
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
