Chris It seems that the erronous lines are gone but I just realized that I cannot change the location where the files are generated to. I was running form a dev RIP and the files where created in the production directory. Would it not be better if one could place the generated config in the RIP directory that you are working in? On 2013/10/04 08:06 AM, Chris Morley wrote: > >> Date: Thu, 3 Oct 2013 16:20:51 +0200 >> From: mar...@mastercut.co.za >> To: emc-users@lists.sourceforge.net >> Subject: Re: [Emc-users] Following Error with Steppers >> >> Chris >> This is a very old bug that has been reported several times. At least >> once by myself. It is still in all the latest code on master. We just >> delete these lines each time. :) >> >> On 2013/10/03 04:43 AM, Chris Morley wrote: >>>> From: bodge...@gmail.com >>>> Date: Wed, 2 Oct 2013 18:47:08 +0100 >>>> To: emc-users@lists.sourceforge.net >>>> Subject: Re: [Emc-users] Following Error with Steppers >>>> >>>> On 2 October 2013 18:26, Russell Brown <russ...@lls.lls.com> wrote: >>>> >>>>> loadrt abs names= >>>>> loadrt lowpass names= >>>> This is a stepfconf bug. I can't recall what prompts it. I thought it >>>> was fixed. (it tries to load a bunch of components with blank names, >>>> and then their pin names collide) >>>> >>> Pncconf bug -but is probably fixed. what version was this made with? >>> > Ok I think it's really fix this time. seems asking for a gladeVCP sample panel > but without a spindle speed display set it off. > Sorry It took so long - I thought I fixed it...musta been busy with Gscreen. > > I also did some other work mostly related to spindle command signals. > > Please test if you can and report bugs (this fix is in master) > > Chris M > > > ------------------------------------------------------------------------------ > October Webinars: Code for Performance > Free Intel webinars can help you accelerate application performance. > Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from > the latest Intel processors and coprocessors. See abstracts and register > > http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users >
-- Regards / Groete Marius D. Liebenberg MasterCut cc Cel: +27 82 698 3251 Tel: +27 12 743 6064 Fax: +27 86 551 8029 Skype: marius_d.liebenberg --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 131003-1, 2013/10/03 Tested on: 2013/10/04 11:25:29 AM avast! - copyright (c) 1988-2013 AVAST Software. http://www.avast.com ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
