what an excellent solution Andy. when i two speed my mill i will keep this in mind . also anote theball screw conversion i embarked on last month worked well , as did the melted delrin for the x axis now im on to converting the quill. i attempted to just drive the existing rack but resolution and backlash prohibit this
jeremy youngs On Sat, Oct 5, 2013 at 12:48 PM, andy pugh <[email protected]> wrote: > On 5 October 2013 17:46, andy pugh <[email protected]> wrote: > > My Mill has an 80 speed gearboxes to give speeds from a slow 1000rpm > > to a _really_ slow 45rpm. > > Err _8_ speed gearbox. > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > October Webinars: Code for Performance > Free Intel webinars can help you accelerate application performance. > Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most > from > the latest Intel processors and coprocessors. See abstracts and register > > http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60134791&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
