I agree, I think getting the chips off the job is what should determine how much fluid you pump. I would rather have too much than too little. As I said, I will put a flow restricting valve on the line.
On 2013/10/15 09:09 AM, Sven Wesley wrote: > 2013/10/14 andy pugh <[email protected]> > >> On 14 October 2013 22:30, Marius Liebenberg <[email protected]> >> wrote: >>> Sven, why did you reduce the flow? >> Maybe the machine was levitating against the ceiling? >> > I have to do the math on that, I think I need a bit more than 50 l/min to > get 600 kg levitating. > The flow is reduced because the coolant is more than strong enough to pop > the nozzles. There's power enough to flush the chips out of pockets anyway. > > /S > ------------------------------------------------------------------------------ > October Webinars: Code for Performance > Free Intel webinars can help you accelerate application performance. > Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from > the latest Intel processors and coprocessors. See abstracts and register > > http://pubads.g.doubleclick.net/gampad/clk?id=60135031&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Regards / Groete Marius D. Liebenberg MasterCut cc Cel: +27 82 698 3251 Tel: +27 12 743 6064 Fax: +27 86 551 8029 Skype: marius_d.liebenberg --- avast! Antivirus: Outbound message clean. Virus Database (VPS): 131014-0, 2013/10/14 Tested on: 2013/10/15 09:27:39 AM avast! - copyright (c) 1988-2013 AVAST Software. http://www.avast.com ------------------------------------------------------------------------------ October Webinars: Code for Performance Free Intel webinars can help you accelerate application performance. Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from the latest Intel processors and coprocessors. See abstracts and register > http://pubads.g.doubleclick.net/gampad/clk?id=60135031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
