On 7 November 2013 14:50, Dave Cole <linuxcncro...@gmail.com> wrote: > Probably another issue with turning the nut is how can you automatically > lube the nut?
If you look at my X-nut, there is a small threaded hole in the casting below the screw. This goes to a drilling that emerges between the two angular-contact bearings (that have their inner rubber seals picked out) and then through a second drilling in the rotating nut carrier aligned with the (fortuitously not sealed) ball return plug in the nut. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ November Webinars for C, C++, Fortran Developers Accelerate application performance with scalable programming models. Explore techniques for threading, error checking, porting, and tuning. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60136231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users