On 09/11/13 16:45, Gene Heskett wrote: > On Saturday 09 November 2013 11:11:40 Kirk Wallace did opine: > >> I was recently looking at task, which also looked like it had no source. >> After poking around a while, it looks like task, and likely halui, are >> made up from other files brought to gether by the local makefile. I >> think having a good understanding of the make system, which I don't >> possess, should reveal the secrets behind these non-source files. This >> is what I have found on making so far: >> http://wiki.linuxcnc.org/cgi-bin/wiki.pl?MakefileDeMystified > It appears I am barking up the wrong tree, it (halui.c) is in camunits-emc, > and it is not currently rebuildable on Lucid, without a lot of fixing I'm > not qualified to do. I saw Jon Kasunich mentioned somewhere in that I > believe, but the build I'm trying to use was last built in 2008. On Hardy > maybe. > > Perhaps, if that was Jon K., he could be persuaded to revisit that code & > bring it up to buildable on lucid? > > Paging Jon K. (pause) Paging Jon K. ;) > > In the meantime, all this video processing takes way too long, so I have > posted to the linux-usb list, asking if its possible, from the > lsusb -v output, to determine the cameras native imager resolution and its > resultant RGB, BGR, etc format so that it doesn't waste time re-arranging, > interpolating and compressing the data before it wraps it in a usb packet & > stuffs it into the cable. > > A secondary problem is that libv4lconvert yelps loudly about formats > unknown when querying the logitech C920. I haven't tried transplanting a > newer version for the default lucid version. > > Thanks Kent. > >> On 11/09/2013 01:02 AM, Gene Heskett wrote: >>> Greetings; >>> >>> It appears that /usr/bin/halui has never been edited and rebuilt since >>> a long time back. >>> >>> When the camview-emc stanza for [HALUI] is added to the ini file, I am >>> getting a whole raft load of errors because halui can't find stuff it >>> is apparently hard coded for, starting with the use of the "emc" >>> naming convention. >>> >>> Is there a fix? Or, since I don't know where this file comes from, is >>> it camview-emc's responsibility? >>> >>> Thanks. >>> >>> Cheers, Gene > > Cheers, Gene also if your using and of the cu-plugins make sure the makefile has been changed to suit linuxcnc as in
override CFLAGS += $(shell pkg-config --cflags opencv)-I/usr/include/linuxcnc ------------------------------------------------------------------------------ November Webinars for C, C++, Fortran Developers Accelerate application performance with scalable programming models. Explore techniques for threading, error checking, porting, and tuning. Get the most from the latest Intel processors and coprocessors. See abstracts and register http://pubads.g.doubleclick.net/gampad/clk?id=60136231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
