On 01/27/2014 10:16 PM, Gregg Eshelman wrote: > Is the Tormach mill a design unique to that company or do they take some > off the shelf Chinese mill and wrap it up all fancy with added parts? > > I think, from talking to the Tormach guys at some meetings, that it started out as made from some pretty stock castings that were used for other makes, but it is hard to tell as they add a bunch of custom enclosure stuff to it. Then, over time, they made refinements to the original design, so it has less in common with other machines. But, I THINK, if you compare their machine without the covers to something from Smithy, the basic castings may look quite similar.
But, I have to admit I don't REALLY know the whole story. Jon ------------------------------------------------------------------------------ WatchGuard Dimension instantly turns raw network data into actionable security intelligence. It gives you real-time visual feedback on key security issues and trends. Skip the complicated setup - simply import a virtual appliance and go from zero to informed in seconds. http://pubads.g.doubleclick.net/gampad/clk?id=123612991&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
