It would probably work for me. Is there a compiled .bit around somewhere, or do I need to gear up to run the vhdl through the Xilinx tools? I'm having difficulty finding the "official" repository of hm2 firmware. I've found the source files, but not the pre-compiled ones. The Mesa .zip file doesn't have .bit's for SVTP4_7i39.
Thanks again, -- Ralph ________________________________________ From: andy pugh [bodge...@gmail.com] Sent: Thursday, February 06, 2014 5:30 PM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] Stripped down TPEN4_5 firmware On 7 February 2014 00:01, Ralph Stirling <ralph.stirl...@wallawalla.edu> wrote: > Is there a stripped down version of the TPEN4_5 firmware > for the Mesa 7I43-4 available, which does not generate the > complement PWM signals (/A, /B, /C) for each axis? I would > like to use those pins for Hall commutation inputs if I could. Does SVTP4_7i39 fit the bill? The 7i39 uses 3 channels of PWM and has 3 GPIO channels for the Hall sensors. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users