So far so good! My newly minted custom TPST3_6 loads without error. Now I need to test it all.
Thanks Andy and Peter. -- Ralph ________________________________________ From: andy pugh [bodge...@gmail.com] Sent: Friday, February 07, 2014 10:40 AM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] Stripped down TPEN4_5 firmware On 7 February 2014 18:19, Ralph Stirling <ralph.stirl...@wallawalla.edu> wrote: > I just realized I did successfully build a custom bitstream a couple > of years ago (ST12), and reran make in that directory, with a successful > outcome. So, with newly bolstered courage, I downloaded the current git > snapshot, edited firmwares.txt to just compile the SVTP4_7I39, and > almost had success. It made it through bitstream generation, > but exited the first call to ghdl in pin.py with a 127 error. Is my bitstream > good or bad? I think it is probably good. (I just got the same result). I think it is the PIN and XML generation step that has failed. I don't think there is any risk in trying the firmware to see if it works. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users