On Sun, 9 Feb 2014, bruno wrote: > Date: Sun, 09 Feb 2014 22:25:32 +0100 > From: bruno <br...@tinkerbox.org> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: emc-users@lists.sourceforge.net > Subject: Re: [Emc-users] mesa 5i25, > pncconf working but not linuxcnc (Chris Morley) > > hal: http://pastebin.com/cBXe7f5w > ini: http://pastebin.com/m8nANyLM > > using linuxcnc 2.5.0 (the livecd install) > > I will try halcmd show as you suggest, thanks !
One thing that stands out is the relatively large backlash compensation I would try setting this to 0 temporarily and see if the following errors go away. > > On 2/9/14 9:55 PM, emc-users-requ...@lists.sourceforge.net wrote: >>>> On 2/9/14 5:25 PM, bruno wrote: >>>>>> >>>>>> This is a stepper system, trivkins, 3 axis mill. >>>>>> I kind of assumed that the tuning in pncconf is using the >>>>>> configuration that it will write, it's not very useful if one tunes >>>>>> things but then the parameters to use are different... >> can you post your hal and INI files somewhere? >> >> Chris M > > > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users