On Sun, 9 Feb 2014, Peter C. Wallace wrote: > Date: Sun, 9 Feb 2014 13:58:07 -0800 (PST) > From: Peter C. Wallace <p...@mesanet.com> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Subject: Re: [Emc-users] mesa 5i25, > pncconf working but not linuxcnc (Chris Morley) > > On Sun, 9 Feb 2014, bruno wrote: > >> Date: Sun, 09 Feb 2014 22:25:32 +0100 >> From: bruno <br...@tinkerbox.org> >> Reply-To: "Enhanced Machine Controller (EMC)" >> <emc-users@lists.sourceforge.net> >> To: emc-users@lists.sourceforge.net >> Subject: Re: [Emc-users] mesa 5i25, >> pncconf working but not linuxcnc (Chris Morley) >> >> hal: http://pastebin.com/cBXe7f5w >> ini: http://pastebin.com/m8nANyLM >> >> using linuxcnc 2.5.0 (the livecd install) >> >> I will try halcmd show as you suggest, thanks !
Also the ferror values are likely way too small .02 mm for ferror and .005 mm for min ferror are probably a lot more realistic > > > One thing that stands out is the relatively large backlash compensation > > I would try setting this to 0 temporarily and see if the following errors go > away. > >> >> On 2/9/14 9:55 PM, emc-users-requ...@lists.sourceforge.net wrote: >>>>> On 2/9/14 5:25 PM, bruno wrote: >>>>>>> >>>>>>> This is a stepper system, trivkins, 3 axis mill. >>>>>>> I kind of assumed that the tuning in pncconf is using the >>>>>>> configuration that it will write, it's not very useful if one tunes >>>>>>> things but then the parameters to use are different... >>> can you post your hal and INI files somewhere? >>> >>> Chris M >> >> >> ------------------------------------------------------------------------------ >> Managing the Performance of Cloud-Based Applications >> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >> Read the Whitepaper. >> http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > Peter Wallace > Mesa Electronics > > (\__/) > (='.'=) This is Bunny. Copy and paste bunny into your > (")_(") signature to help him gain world domination. > > > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users