On Sun, 2 Mar 2014, Gene Heskett wrote:
>>
>>
>> If you have a 5V push-pull output, another way would be to connect this
>> output to Cathode1 and Anode2 and connect Anode1 to 5V through a
>> resistor and Cathode2 to ground through another resistor.
>>
> Thanks Peter, that will solve the single ended signal source problem too at
> the cost of another conductor from the 5 volts in the C1G.
>
> But the i limiting R can also be in the common signal input line I'd
> assume?  Or will that common voltage drop eat my lunch? OTOH, resistors in
> 500 packs from the shack are cheap. :)
>
> Cheers, Gene
> -- 
> "There are four boxes to be used in defense of liberty:
> soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> Genes Web page <http://geneslinuxbox.net:6309/gene>
>
> NOTICE: Will pay 100 USD for an HP-4815A defective but
> complete probe assembly.


Sure, one resistor is fine for the second method. Slight advantage of two is 
that the LED drives can be individualy adjusted.

>
>
> ------------------------------------------------------------------------------
> Flow-based real-time traffic analytics software. Cisco certified tool.
> Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer
> Customize your own dashboards, set traffic alerts and generate reports.
> Network behavioral analysis & security monitoring. All-in-one tool.
> http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

Peter Wallace
Mesa Electronics

(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.


------------------------------------------------------------------------------
Flow-based real-time traffic analytics software. Cisco certified tool.
Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer
Customize your own dashboards, set traffic alerts and generate reports.
Network behavioral analysis & security monitoring. All-in-one tool.
http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to