Hi
I have a lathe that does just one job all of the time (one part with 
varied sizes). The trick with this lathe is that is is two lathes in 
one. A mirrored setup with a dual tool post in the middle and a spindle 
on both ends. The tools are fixed always. It will cut one side finished 
and then move to the other side.
I intend to use ngcgui to produce the gcode and use a gladevcp panel to 
select the side.
Now my question is how do I swap the config around without having to 
generate mirrored gcode? I.E. I want to select the left hand lathe, 
generate the gcode or load it for that matter and cut. When it has done, 
I want to select the other side and cut the same code again. Or so I think.

Any suggestions please?

-- 

Regards /Groete

Marius D. Liebenberg
+27 82 698 3251
+27 12 743 6064


------------------------------------------------------------------------------
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases and their
applications. Written by three acclaimed leaders in the field,
this first edition is now available. Download your free book today!
http://p.sf.net/sfu/13534_NeoTech
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to