Can you rotate like you show and then mirror X?
On Fri, Mar 21, 2014 at 10:50 AM, Marius Liebenberg <mar...@mastercut.co.za>wrote: > > On 2014-03-21 17:29, andy pugh wrote: > > On 21 March 2014 15:17, Marius Liebenberg <mar...@mastercut.co.za> > wrote: > > > >> . The trick with this lathe is that is is two lathes in > >> one. A mirrored setup with a dual tool post in the middle and a spindle > >> on both ends > > A picture would help a lot. > Very straight forward really. Not a standard lathe but a custom made to > cut plastic. Looks much like a wood lathe with two chucks. Linear slides > along the Z axis with a chuck at each end. One X axis with permanent > tools set up at both ends of the tool holder. > > Do you want to use XZ for both spindles, or would XZ for one and UW > > for the other be better? > I was hoping to use XZ for both if possible. The action of G10 L2 P1 > R180 would have worked if I did not want to swing around the X. It is > exactly what I want but just for swinging around the X axis. It means > that Z is reorientated. > > Either option is relatively straightforward apart from avoiding > > following errors when you switch spindles, or switch the toolpost to > > following a different G-code output. > I would like to keep the same gcode if possible. > > Will I have to remap the G10 maybe or do you have a better solution? > > -- > > Regards /Groete > > Marius D. Liebenberg > +27 82 698 3251 > +27 12 743 6064 > > > > ------------------------------------------------------------------------------ > Learn Graph Databases - Download FREE O'Reilly Book > "Graph Databases" is the definitive new guide to graph databases and their > applications. Written by three acclaimed leaders in the field, > this first edition is now available. Download your free book today! > http://p.sf.net/sfu/13534_NeoTech > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. ------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/13534_NeoTech _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users