Gene, You can set the homing order and the position you call home in the ini file.
JT On 4/19/2014 4:36 PM, Gene Heskett wrote: > Greetings all; > > Where I was more or less forced to mount the Z homing switch puts it in a > position where quite a bit of its work envelop has it closed, with it > opening about 3/4" from the chuck when running toward the chuck. > > So I either need to run it pretty close to the chuck (watch the tally LED > on the C1G BOB) before initiating the HOME procedure, or figure out a way > to run the x in .1" to make sure /that/ switch is open, then run the Z > towards the chuck until the Z switch opens, then do the rest of the home > sequence. > > Kind of a PIMA, and I am wondering if I could cobble something up in the > .hal file to do that. > > Suggestions? Comments welcome etc. > > Cheers, Gene ------------------------------------------------------------------------------ Learn Graph Databases - Download FREE O'Reilly Book "Graph Databases" is the definitive new guide to graph databases and their applications. Written by three acclaimed leaders in the field, this first edition is now available. Download your free book today! http://p.sf.net/sfu/NeoTech _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
