Yea, I knew I could add custom buttons... One possibility might be to to use the existing spindle buttons.. and if you hit them after they're toggled, the increase the speed 100RPM like Axis does.. That way, you don't add any more buttons..
One OTHER thing I noticed that is missing is the pan/rotate toggle button for the preview.. no way to switch to rotate view if using strictly touch screen.. And for some reason, when you start up linuxcnc, it's in One of the Axis only views instead of P view.. (even though P view is highlighted) so you have to click another view and then back to P. On 05/01/2014 02:27 PM, Niemand Sonst wrote: > Hallo Billy, > > I did not forgot is, I just did not include that button, because of > space reasons. > You may add two buttons using a custom panel, I would recommend > box_custom_3 or box_custom_4 for that purpose, > and connect them to the corresponding halui.spindle pin. > > The spindle will than be increased or decreased. You will see the > changes in the feedback bar, but not in the spindle vel label (the label > over the spindle override slider). > > I will look if I can find a solution for that. > > Question to all! > How important are this buttons? > > Norbert > > > Am 01.05.2014 19:36, schrieb Billy Huddleston: >> Looking at this gmoccapy.. I don't see a way to manually increase/decrease >> the spindle speed using a +/- button.. Was this omitted by accident or am I >> just missing it? >> > > ------------------------------------------------------------------------------ > "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE > Instantly run your Selenium tests across 300+ browser/OS combos. Get > unparalleled scalability from the best Selenium testing platform available. > Simple to use. Nothing to install. Get started now for free." > http://p.sf.net/sfu/SauceLabs > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users -- Billy Huddleston Inner Vision *William Huddleston Inner Vision Development Corp* Office: 865.560.2752 Fax: 865.560.2703 http://www.ivdc.com *Development and Consulting... Simplified.* <http://www.facebook.com/pages/Inner-Vision-Development/120023721424> <http://twitter.com/ivdc> <http://www.linkedin.com/in/ivdccorp> ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available. Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
