Am 10.05.2014 um 20:08 schrieb Jon Elson <el...@pico-systems.com>: > OK, found out at least part of the problem. When it > tries to start camview-emc, it tried to use > liblinuxcnchal.so.0, which does not exist. Anybody > know where it comes from?
that is the userland hal library and produced during a normal build, nothing HAL-related runs without it in RIP builds it should live in $EMC2_HOME/lib in non-RIP builds it's either /usr/lib/ or maybe /usr/lib/linuxcnc these days meaning - you need a working install of linuxCNC on that host to run camview-emc - Michael > > I'm going to load all the dependencies for building > the software, that probably will fix it. > > Thanks, > > Jon > > ------------------------------------------------------------------------------ > Is your legacy SCM system holding you back? Join Perforce May 7 to find out: > • 3 signs your SCM is hindering your productivity > • Requirements for releasing software faster > • Expert tips and advice for migrating your SCM now > http://p.sf.net/sfu/perforce > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Is your legacy SCM system holding you back? Join Perforce May 7 to find out: • 3 signs your SCM is hindering your productivity • Requirements for releasing software faster • Expert tips and advice for migrating your SCM now http://p.sf.net/sfu/perforce _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
