I have the extension with its imitation pipe thread all made except for the boring of a 13mm deep 9.25mm hole in the end for the screw to be inserted into. And of coarse its not slit yet, tomorrows project.
I also have a round nut made, using the same thread taper, which will screw onto the extension about 2 turns. Now if those thrust bearings would get here, the tracking said they were in the Windy City Friday night, must be time to hit the tracker again. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
