On 5/18/14 01:42 , erik wrote: > Following these instructions > http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Build_A_Simulator_Manually > worked for my last setup with Ubuntu 12.4 (32Bit) quite well. > > Now I have a fresh install of Ubuntu 14.4 (64Bit) running and have > trouble with the dependency "libgnomeprintui2.2-dev". "apt-get install" > does not find it (same for :i386). All other missing dependencies were > installed without any problems. > > What do I have to do next?
The Gnome 2 APIs, including the gnomeprintui library that LinuxCNC uses, were removed from Ubuntu sometime between 12.04 Precise and 14.04 Trusty. The only thing that LinuxCNC uses libgnomeprintui for is printing from Classic Ladder. If you can live without that, then remove the build dependency on libnomeprintui-dev from debian/control.in and rerun debian/configure. The build should work, and everything except for printing ladder diagrams should work. This is new territory, please let us know how how it goes! -- Sebastian Kuzminsky ------------------------------------------------------------------------------ "Accelerate Dev Cycles with Automated Cross-Browser Testing - For FREE Instantly run your Selenium tests across 300+ browser/OS combos. Get unparalleled scalability from the best Selenium testing platform available Simple to use. Nothing to install. Get started now for free." http://p.sf.net/sfu/SauceLabs _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
