hi i noticed in ini file on y axis ---#the y axis servo's encoder has an index channel, so we use it to improve the home accuracy--- and for x and z -- #the x (z) axis servo's encoder does not have an index channel, so we have to to home without index--- /////////////////////////////////////// question did system check and found it by them self? does this effect tuning of motor ? on x and z axis i have similar motor and y has sem motor- did system check and found something or it is coincidence?
On Wed, May 28, 2014 at 2:26 PM, a k <[email protected]> wrote: > Hi > in ini file i think that as default setting for this parameters > Ferror=1 > min error=0.002 > and FF1=1 > am i right or no? > i am not sure about tune up only with P FF1 and FF2. > http://gnipsel.com/linuxcnc/tuning/servo.html > it did not work out in my case > > > > On Wed, May 28, 2014 at 12:08 PM, a k <[email protected]> wrote: > >> Yes i did check that and they are in set up for differential mode. >> ///// >> Next will be --4. Make sure that the filter bits of the HostMot2 encoder >> counters are set true >> How i can check this one? >> in which file ? >> >> >> >> >> On Wed, May 28, 2014 at 10:28 AM, andy pugh <[email protected]> wrote: >> >>> On 28 May 2014 17:59, a k <[email protected]> wrote: >>> >>> > which file ? any instruction? >>> >>> http://www.mesanet.com/pdf/motion/7i33man.pdf >>> >>> Page 2 >>> >>> -- >>> atp >>> If you can't fix it, you don't own it. >>> http://www.ifixit.com/Manifesto >>> >>> >>> ------------------------------------------------------------------------------ >>> Time is money. Stop wasting it! Get your web API in 5 minutes. >>> www.restlet.com/download >>> http://p.sf.net/sfu/restlet >>> _______________________________________________ >>> Emc-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> >> > ------------------------------------------------------------------------------ Time is money. Stop wasting it! Get your web API in 5 minutes. www.restlet.com/download http://p.sf.net/sfu/restlet _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
