On 2014-07-24 21:33, Viesturs Lācis wrote: > 2014-07-24 21:43 GMT+03:00 Marius Liebenberg <mar...@mastercut.co.za>: >> Has any one done this before. I have a rotational fourth axis that has a >> stepper and the rest of the system is servo based. Is there an example >> or some direction from the coven? :) > First cnc machine I built has servos for x and y, but stepper for z. > My router has servos for x, y and z, but stepper for w axis. > What kind of example are you looking for? Simply add stepgen to your > config (if you are using Mesa cards, you might need customized > firware, just like me). I am using Mesa cards. Why did you need custom firmware? I am using a standard parport for the stepper.
> Viesturs > > ------------------------------------------------------------------------------ > Want fast and easy access to all the code in your enterprise? Index and > search up to 200,000 lines of code with a free copy of Black Duck > Code Sight - the same software that powers the world's largest code > search on Ohloh, the Black Duck Open Hub! Try it now. > http://p.sf.net/sfu/bds > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 QQ 1767394877 ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
