On Saturday 06 September 2014 12:00:20 Tomaz T. did opine And Gene did reply: > Commenting out LP line in modules doesn't help, and also > uncommenting install parport_pc /bin/true didn't > in /etc/modprobe.d/linuxcnc.conf > If the std linux parport driver is available, and udev loads it, the results are similar. So if you have that driver in the /lib/modules/kernel-version tree, nuke it. In the meantime, rmmod it if it shows up in an lsmod listing before you start linuxcnc.
This is a rather elderly problem if that is the problem, but it can still bite a new bee. > > > > Next problem occurred after update to 2.7.0 pre, as when I restart > > linuxcnc i'm getting error saying: Debug file information:insmod: > > error inserting > > '/usr/realtime-2.6.32-122-rtai/modules/linuxcnc/hal_parport.ko': -1 > > Device or resource busymy5axis_load.hal:25: exit value: > > 1my5axis_load.hal:25: insmod failed, returned -1See the output of > > 'dmesg' for more information.2036 > > ----------------------------------------------------------------------- > ------- Slashdot TV. > Video for Nerds. Stuff that matters. > http://tv.slashdot.org/ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that matters. http://tv.slashdot.org/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users