On Thursday 18 September 2014 04:05:10 Erik Christiansen did opine And Gene did reply: > On 17.09.14 23:50, andy pugh wrote: > > On 17 September 2014 23:20, David Bagby <d...@calypsoventures.com> wrote: > > > Along those lines, folks may find this interesting: > > > https://www.lab-nation.com/ > > > > > > 2 channel 100 MHz scope, 8 channel logic analyzer, wave for > > > generator, pick your favorite screen flavor. > > > OSx, Linux, Windwos, Android or iOS. > > > > Along the same lines: http://redpitaya.com > > The similar sort of unit I bought a couple of years ago, an earlier > model of the 2 channel one here: > > http://bitscope.com/product/ > > began life as an open-source design. It's also 100 Ms/s, etc., but the > price then was more than the newer gadgets seem to be now. At the time, > it was the only one I could find which would run under linux. The > sturdy AL extruded case is nice. > > It's a good idea to buy at least one HV rated x10 probe together with > one of these small units. The inputs on mine are only rated to 63v, so > a good x10 probe is needed before poking around in 240v mains stuff. > > Erik
Actually, compared to the limited BW of the DS203, this is not that bad a deal. <http://www.diyertool.com/atten-ads1102cal-100mhz-digital-oscilloscope.html> I could drop the card for that one without a lot of arm twisting. In fact I just did. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> US V Castleman, SCOTUS, Mar 2014 is grounds for Impeaching SCOTUS ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users