I'll try that today
------Original Mail------ From: "andy pugh" <bodge...@gmail.com> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Thu, 18 Sep 2014 15:07:21 +0100 Subject: Re: [Emc-users] New to LinuxCNC and PnCConf and need some help... On 18 September 2014 14:56, <p...@wpnet.us> wrote: > I figured I'd just get the spindle running at a known speed and put a > frequency counter on it to calculate CPR It's easier just to reset the encoder, then turn the spindle through one turn, and see what the number is. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Want excitement? Manually upgrade your production database. When you want reliability, choose Perforce Perforce version control. Predictably reliable. http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users