Hi i did mistake -instead F0 i should say G0 and G1. sorry. i can see that G0 and G1 not remappable but G code from ---14.2. Currently unallocated G-codes: can be remap. am i right?
thanks aram On Mon, Oct 13, 2014 at 10:56 AM, andy pugh <[email protected]> wrote: > On 13 October 2014 18:23, a k <[email protected]> wrote: > > Hello > > is it possible to make to emc2 send/generate signal like I/O signal-5 V > DC > > - when system reads F0 -rapid move? > > Yes. But you might have to read some documentation. > http://www.linuxcnc.org/docs/html/remap/structure.html > Section 4.1 says that F is remappable. > the stdglue.py creates a parametr #<feed> which contains the feed rate. > So, you remap F to call a fragment of g-code like > > O<fword> sub > O100 if [#<feed> eq 0] > M64 P0 > O100 else > F#<feed> > M65 P0 > O100 endif > O<fword> endsub > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > Comprehensive Server Monitoring with Site24x7. > Monitor 10 servers for $9/Month. > Get alerted through email, SMS, voice calls or mobile push notifications. > Take corrective actions from your mobile device. > http://p.sf.net/sfu/Zoho > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
