in addition when machine will read G0.1 or G0.2 etc unallocated G-codes--- will system generate Error - unrecognized code or simply skip them and move to the next ?
On Thu, Oct 16, 2014 at 1:13 PM, a k <pccncmach...@gmail.com> wrote: > Hi > i did mistake -instead F0 i should say G0 and G1. > sorry. > i can see that G0 and G1 not remappable > but G code from ---14.2. Currently unallocated G-codes: > can be remap. > am i right? > > thanks > aram > > > > On Mon, Oct 13, 2014 at 10:56 AM, andy pugh <bodge...@gmail.com> wrote: > >> On 13 October 2014 18:23, a k <pccncmach...@gmail.com> wrote: >> > Hello >> > is it possible to make to emc2 send/generate signal like I/O signal-5 V >> DC >> > - when system reads F0 -rapid move? >> >> Yes. But you might have to read some documentation. >> http://www.linuxcnc.org/docs/html/remap/structure.html >> Section 4.1 says that F is remappable. >> the stdglue.py creates a parametr #<feed> which contains the feed rate. >> So, you remap F to call a fragment of g-code like >> >> O<fword> sub >> O100 if [#<feed> eq 0] >> M64 P0 >> O100 else >> F#<feed> >> M65 P0 >> O100 endif >> O<fword> endsub >> >> -- >> atp >> If you can't fix it, you don't own it. >> http://www.ifixit.com/Manifesto >> >> >> ------------------------------------------------------------------------------ >> Comprehensive Server Monitoring with Site24x7. >> Monitor 10 servers for $9/Month. >> Get alerted through email, SMS, voice calls or mobile push notifications. >> Take corrective actions from your mobile device. >> http://p.sf.net/sfu/Zoho >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
