Why do not use a custom M function syncronized to do that ? M1xx G1 X100 Y240 F100 Into the M1xx you can fit the Hal code to perform what you need. Il giorno 17/ott/2014 21:30, "a k" <pccncmach...@gmail.com> ha scritto:
> About: > I was wondering if motion.motion-type would work but that > distinguishes between lines and arcs rather then feeds or traverses. > > Motion can be 2 type -- first -- when machine does deposition/cutting - > actual work and second - when machine position themself to the > next beginning point. > when machine does cutting/deposition -- that happened with G1 + feed. > when machine position themself to the next beginning point then it use G0 - > rapid move. > I want really identify what kind of motion in any given moment -- is it G1 > (cutting -metal removing etc) or is it G0 (rapid motion to the next > starting point) > When it is G1 then it will activate deposition system. When motion G0 > rapid- then i need to idle deposition system. > some idea. > > > > > > > > On Fri, Oct 17, 2014 at 4:32 AM, andy pugh <bodge...@gmail.com> wrote: > > > On 17 October 2014 11:35, Marius Alksnys <marius.alks...@gmail.com> > wrote: > > > Maybe motion.current-vel and comp hal component, connected to some > > > output pin will do the task for you? > > > > Yes, that is probably easier than a remap, I was answering the > > question asked rather than the question intended. > > > > I was wondering if motion.motion-type would work but that > > distinguishes between lines and arcs rather then feeds or traverses. > > > > -- > > atp > > If you can't fix it, you don't own it. > > http://www.ifixit.com/Manifesto > > > > > > > ------------------------------------------------------------------------------ > > Comprehensive Server Monitoring with Site24x7. > > Monitor 10 servers for $9/Month. > > Get alerted through email, SMS, voice calls or mobile push notifications. > > Take corrective actions from your mobile device. > > http://p.sf.net/sfu/Zoho > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > ------------------------------------------------------------------------------ > Comprehensive Server Monitoring with Site24x7. > Monitor 10 servers for $9/Month. > Get alerted through email, SMS, voice calls or mobile push notifications. > Take corrective actions from your mobile device. > http://p.sf.net/sfu/Zoho > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Comprehensive Server Monitoring with Site24x7. Monitor 10 servers for $9/Month. Get alerted through email, SMS, voice calls or mobile push notifications. Take corrective actions from your mobile device. http://p.sf.net/sfu/Zoho _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users